[OS] Problems - Making COIN-OS 2.3.2 on win32

[Stefan Vigerske]

Hi,

> please find attached the output of ..cgl/config-status --recheck and the corresponding config.log

There is thisone in the output of configure:
   FIND: Parameterformat falsch

I think it does not find the msys find, and uses the MS one. Can you 
check whether there is one? Should be /usr/bin or something.

There should be a way to setup CGL_SUBDIRS without find, though.

Stefan

>
>
>
>
>
> Cheers,
>
> Mike
>
> Am 12.02.2011 um 17:07 schrieb Stefan Vigerske:
>
>> Hi,
>>
>> when building Cgl, it did not recourse into subdirectories (Cgl/src/Cgl*). This list of subdirectories is setup during configure in Cgl, and something seem to fail there (CGL_SUBDIRS is empty).
>> Do you have 'find' unter MSys?
>> Can you send the output of going into the build directory of Cgl and doing   ./config-status --recheck   ?
>>
>> Stefan
>>
>> Am 12.02.2011 16:43, schrieb Mike Steglich:
>>> Hi,
>>>
>>> As mentioned in my last eMail, I started an additional test using the following environment:
>>>    	- Windows7 Professional  under Parallels on  OS X 10.6.6
>>> 	- MSys 1.0.11
>>> 	- MinGW (gcc 4.4.0)
>>> 	- QT4 (not used for these issues)
>>> 	According to Ted's question: I did not install pkg-config.
>>>
>>> I have tested to packages:
>>> 	1) The COIN- OS package (2.3.2)
>>> 	2) The COIN-CBC package  (2.7)
>>>
>>> 1) COIN-OS package
>>> ***********************************************************************
>>> Configure was successful.
>>> sh  ./configure COIN_SKIP_PROJECTS="Ipopt Bonmin Bcp DyLP Couenne HSL SYMPHONY"  --enable-static --disable-shared>coin.config.out 2>&1
>>>
>>> Please find configure's output in the following file.
>>>
>>>
>>>
>>>
>>>
>>>
>>> As you can see in the file coin.make.out, I got the same errors as in the tests before.
>>>
>>>
>>>
>>>
>>>
>>>
>>> Additionally to these outputs please find attached the Makefile and config.log
>>>
>>>
>>>
>>>
>>>
>>> and as asked by Stefan the output of running make in .../COIN-OS/Cgl
>>>
>>>
>>>
>>>
>>>
>>> and of nm .../COIN-OS/Cgl/src/.libs/libCgl.a
>>>
>>>
>>>
>>>
>>>
>>> and of  nm .../COIN-OS/Cbc/src/.libs/libCbcSolver.a
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> 2) COIN-CBC package
>>> *******************************************************************
>>> The results  are the same ....
>>> Configure finished w/o errors and make failed with the same errors as the COIN-OS make:
>>>
>>> e.g.:
>>> ./.libs/libCbcSolver.a(CbcSolver.o):CbcSolver.cpp:(.text+0xc2ee): undefined reference to `CglGomory::CglGomory()'
>>> ./.libs/libCbcSolver.a(CbcSolver.o):CbcSolver.cpp:(.text+0xc304): undefined reference to `CglGomory::setLimitAtRoot(int)'
>>> ./.libs/libCbcSolver.a(CbcSolver.o):CbcSolver.cpp:(.text+0xc31a): undefined reference to `CglGomory::setLimit(int)'
>>> ...
>>>
>>>
>>> Please find attached the outputs of running configure and make in CBC's build directory:
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Cheers,
>>>
>>> Mike
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Am 11.02.2011 um 17:59 schrieb Ted Ralphs:
>>>
>>>> If you could send more information about the troubles you've run
>>>> into (the cofig.log file, for example), I can look into it. I am also
>>>> having trouble building Cbc with MSys/MinGW under Windows 7, but I'm
>>>> not sure it's the same issue you are having. Are you using pkg-config
>>>> or do yoHi,u have it installed?
>>>>
>>>> Cheers,
>>>>
>>>> Ted
>>>>
>>>> On Thu, Feb 10, 2011 at 2:40 PM, Gus Gassmann<Horand.Gassmann at dal.ca>   wrote:
>>>>> On 10 Feb 2011 at 19:59, Mike Steglich wrote:
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> I tried to build Clp, Cgl and Cbc in the way suggested by Stefan.  But I obtained the same errors.
>>>>>> Additionally I downloaded CBC 2.6.2 and followed the instructions given in the INSTALLATION file.  I regret to say that I got the same errors.
>>>>>>
>>>>>> It seems, that is not possible to build Cbc 2.6.2 using Msys and MinGw on Windows7. I will check these issues on an other PC to proof this hypothesis.
>>>>>
>>>>> The current version of OS shows Cbc 2.7 in its depencies file. I wonder if it is
>>>>> just a version problem. The undefined reference errors point at missing
>>>>> include file directories on the compile or link command. If the location of the
>>>>> code changed between versions, this is exactly the behaviour I would expect
>>>>> to see.
>>>>>
>>>>> _______________________________________________
>>>>> OS mailing list
>>>>> OS at list.coin-or.org
>>>>> http://list.coin-or.org/mailman/listinfo/os
>>>>>
>>>>> --
>>>>> You received this message because you are subscribed to the Google Groups "Optimization Services (OS)" group.
>>>>> To post to this group, send email to optimizationservices at googlegroups.com.
>>>>> To unsubscribe from this group, send email to optimizationservices+unsubscribe at googlegroups.com.
>>>>> For more options, visit this group at http://groups.google.com/group/optimizationservices?hl=en.
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Dr. Ted Ralphs
>>>> Associate Professor, Lehigh University
>>>> (610) 628-1280
>>>> ted 'at' lehigh 'dot' edu
>>>> coral.ie.lehigh.edu/~ted
>>>
>>
>