[OS] Problems - Making COIN-OS 2.3.2 on win32
Mike Steglich
mike.steglich at berlin.de
Sat Feb 12 12:12:54 EST 2011
Hi,
please find attached the output of ..cgl/config-status --recheck and the corresponding config.log
-------------- next part --------------
A non-text attachment was scrubbed...
Name: recheck.out
Type: application/octet-stream
Size: 4099 bytes
Desc: not available
Url : http://list.coin-or.org/pipermail/os/attachments/20110212/af629dd7/attachment-0002.obj
-------------- next part --------------
A non-text attachment was scrubbed...
Name: config.log
Type: application/octet-stream
Size: 29652 bytes
Desc: not available
Url : http://list.coin-or.org/pipermail/os/attachments/20110212/af629dd7/attachment-0003.obj
-------------- next part --------------
Cheers,
Mike
Am 12.02.2011 um 17:07 schrieb Stefan Vigerske:
> Hi,
>
> when building Cgl, it did not recourse into subdirectories (Cgl/src/Cgl*). This list of subdirectories is setup during configure in Cgl, and something seem to fail there (CGL_SUBDIRS is empty).
> Do you have 'find' unter MSys?
> Can you send the output of going into the build directory of Cgl and doing ./config-status --recheck ?
>
> Stefan
>
> Am 12.02.2011 16:43, schrieb Mike Steglich:
>> Hi,
>>
>> As mentioned in my last eMail, I started an additional test using the following environment:
>> - Windows7 Professional under Parallels on OS X 10.6.6
>> - MSys 1.0.11
>> - MinGW (gcc 4.4.0)
>> - QT4 (not used for these issues)
>> According to Ted's question: I did not install pkg-config.
>>
>> I have tested to packages:
>> 1) The COIN- OS package (2.3.2)
>> 2) The COIN-CBC package (2.7)
>>
>> 1) COIN-OS package
>> ***********************************************************************
>> Configure was successful.
>> sh ./configure COIN_SKIP_PROJECTS="Ipopt Bonmin Bcp DyLP Couenne HSL SYMPHONY" --enable-static --disable-shared>coin.config.out 2>&1
>>
>> Please find configure's output in the following file.
>>
>>
>>
>>
>>
>>
>> As you can see in the file coin.make.out, I got the same errors as in the tests before.
>>
>>
>>
>>
>>
>>
>> Additionally to these outputs please find attached the Makefile and config.log
>>
>>
>>
>>
>>
>> and as asked by Stefan the output of running make in .../COIN-OS/Cgl
>>
>>
>>
>>
>>
>> and of nm .../COIN-OS/Cgl/src/.libs/libCgl.a
>>
>>
>>
>>
>>
>> and of nm .../COIN-OS/Cbc/src/.libs/libCbcSolver.a
>>
>>
>>
>>
>>
>>
>>
>> 2) COIN-CBC package
>> *******************************************************************
>> The results are the same ....
>> Configure finished w/o errors and make failed with the same errors as the COIN-OS make:
>>
>> e.g.:
>> ./.libs/libCbcSolver.a(CbcSolver.o):CbcSolver.cpp:(.text+0xc2ee): undefined reference to `CglGomory::CglGomory()'
>> ./.libs/libCbcSolver.a(CbcSolver.o):CbcSolver.cpp:(.text+0xc304): undefined reference to `CglGomory::setLimitAtRoot(int)'
>> ./.libs/libCbcSolver.a(CbcSolver.o):CbcSolver.cpp:(.text+0xc31a): undefined reference to `CglGomory::setLimit(int)'
>> ...
>>
>>
>> Please find attached the outputs of running configure and make in CBC's build directory:
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Cheers,
>>
>> Mike
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> Am 11.02.2011 um 17:59 schrieb Ted Ralphs:
>>
>>> If you could send more information about the troubles you've run
>>> into (the cofig.log file, for example), I can look into it. I am also
>>> having trouble building Cbc with MSys/MinGW under Windows 7, but I'm
>>> not sure it's the same issue you are having. Are you using pkg-config
>>> or do yoHi,u have it installed?
>>>
>>> Cheers,
>>>
>>> Ted
>>>
>>> On Thu, Feb 10, 2011 at 2:40 PM, Gus Gassmann<Horand.Gassmann at dal.ca> wrote:
>>>> On 10 Feb 2011 at 19:59, Mike Steglich wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> I tried to build Clp, Cgl and Cbc in the way suggested by Stefan. But I obtained the same errors.
>>>>> Additionally I downloaded CBC 2.6.2 and followed the instructions given in the INSTALLATION file. I regret to say that I got the same errors.
>>>>>
>>>>> It seems, that is not possible to build Cbc 2.6.2 using Msys and MinGw on Windows7. I will check these issues on an other PC to proof this hypothesis.
>>>>
>>>> The current version of OS shows Cbc 2.7 in its depencies file. I wonder if it is
>>>> just a version problem. The undefined reference errors point at missing
>>>> include file directories on the compile or link command. If the location of the
>>>> code changed between versions, this is exactly the behaviour I would expect
>>>> to see.
>>>>
>>>> _______________________________________________
>>>> OS mailing list
>>>> OS at list.coin-or.org
>>>> http://list.coin-or.org/mailman/listinfo/os
>>>>
>>>> --
>>>> You received this message because you are subscribed to the Google Groups "Optimization Services (OS)" group.
>>>> To post to this group, send email to optimizationservices at googlegroups.com.
>>>> To unsubscribe from this group, send email to optimizationservices+unsubscribe at googlegroups.com.
>>>> For more options, visit this group at http://groups.google.com/group/optimizationservices?hl=en.
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Dr. Ted Ralphs
>>> Associate Professor, Lehigh University
>>> (610) 628-1280
>>> ted 'at' lehigh 'dot' edu
>>> coral.ie.lehigh.edu/~ted
>>
>
More information about the OS
mailing list