[Couenne] Configure, build and install Couenne

[Virginia Costa]

Hi again,

Now, I try to install Couenne with --without-scip confguration option.
There was no more erros. So, I executed "make install". But, when I look
inside the bin directory, there's no couenne binary file.
Do you know what I did wrong?
Many Thanks.
Virginia.


2013/8/13 Stefan Vigerske <stefan at math.hu-berlin.de>

> Hi,
>
>
> On 08/13/2013 07:42 PM, Virginia Costa wrote:
>
>> Hi Stefan,
>>
>> Thanks for your answer. I have another question: what about SCIP? Does
>> couenne need it to run?
>> After your answer, I try to build again the package with --without-glpk
>> configure option. There's no more error with amd.h, but, now, scip is
>> returning some errors.
>> Do you know if scip is necessary to install Couenne?
>>
>
> No, SCIP may only used in the feaspump heuristic, which is off by default.
>
> Stefan
>
>  Thanks one more time.
>> Virginia.
>>
>>
>> 2013/8/13 Stefan Vigerske <stefan at math.hu-berlin.de>
>>
>>  Hi,
>>>
>>> your Glpk installation does not seem to bring the amd.h that usually
>>> comes
>>> with Glpk. Clp assumes that if it has Glpk, then also amd.h will be
>>> available.
>>> However, Couenne does not make any use of Glpk, there is no need to
>>> include it.
>>> Further, if you have blas and lapack installed in your system, then it
>>> should be picked up by configure automatically.
>>>
>>> Stefan
>>>
>>>
>>>
>>> On 08/13/2013 04:04 AM, Virginia Costa wrote:
>>>
>>>  Hello everybody,
>>>> I'm a new user of Couenne and I'd like to install this package in my
>>>> machine, which has Ubuntu 13.04. I tried to install it so many times,
>>>> but,
>>>>    unfortunately, I didn't get it.
>>>>
>>>> I downloaded the Couenne package by svn, as follows:
>>>> svn co https://projects.coin-or.org/****svn/Couenne/stable/0.4<https://projects.coin-or.org/**svn/Couenne/stable/0.4>
>>>> <https:**//projects.coin-or.org/svn/**Couenne/stable/0.4<https://projects.coin-or.org/svn/Couenne/stable/0.4>
>>>> >Couenne
>>>>
>>>>
>>>> In the operation system, I have glpk, zlib, blas and lapack installed. I
>>>> also installed soplex 1.7.0 in the ThirdParty  directory and I installed
>>>> the packages Metis, SCIP and Mumps by using the get.XXXX script,
>>>> avaiable
>>>> inside the Couenne package.
>>>>
>>>> After all, I configure the package as following:
>>>>
>>>> #!/bin/bash
>>>> GLPKLIB="/usr/lib"
>>>> GLPKINC="/usr/include"
>>>> BLASLIB="/usr/lib/libblas"
>>>> LAPACKLIB="/usr/lib/lapack"
>>>>
>>>> ../configure -C --with-glpk-lib=${GLPKLIB} --with-glpk-incdir=${GLPKINC}
>>>> --with-blas-lib=${BLASLIB} --with-lapack-lib=${LAPACKLIB} --without-asl
>>>> --with-gnu-ld
>>>>
>>>> And I got the output showed in the file attached.
>>>>
>>>> When I try to buid the package, It's returns the following error:
>>>>
>>>> (...)
>>>>
>>>>    g++ -DHAVE_CONFIG_H -I. -I../../../Clp/src
>>>> -I/home/virscosta/coinor/****Couenne/ThirdParty/Mumps/****MUMPS/libseq
>>>> -I/home/virscosta/coinor/****Couenne/ThirdParty/Mumps/****MUMPS/include
>>>> -I/home/virscosta/coinor/****Couenne/ThirdParty/Metis/****metis-4.0/Lib
>>>> -I/usr/include -I/home/virscosta/coinor/****Couenne/CoinUtils/src
>>>> -I/home/virscosta/coinor/****Couenne/build/CoinUtils/src
>>>> -DCOIN_HAS_CLP -O3
>>>>
>>>> -pipe -DNDEBUG -pedantic-errors -Wparentheses -Wreturn-type -Wcast-qual
>>>> -Wall -Wpointer-arith -Wwrite-strings -Wconversion -Wno-unknown-pragmas
>>>> -Wno-long-long -DCLP_BUILD -MT ClpCholeskyUfl.lo -MD -MP -MF
>>>> .deps/ClpCholeskyUfl.Tpo -c ../../../Clp/src/****ClpCholeskyUfl.cpp
>>>>  -fPIC
>>>> -DPIC -o .libs/ClpCholeskyUfl.o
>>>> ../../../Clp/src/****ClpCholeskyUfl.cpp:13:17: fatal error: amd.h: No
>>>> such
>>>>
>>>> file
>>>> or directory
>>>> compilation terminated.
>>>> make[4]: ** [ClpCholeskyUfl.lo] Erro 1
>>>> make[4]: Saindo do diretório `/home/virscosta/coinor/**
>>>>
>>>> Couenne/build/Clp/src'
>>>> make[3]: ** [all-recursive] Erro 1
>>>> make[3]: Saindo do diretório `/home/virscosta/coinor/**
>>>>
>>>> Couenne/build/Clp/src'
>>>> make[2]: ** [all] Erro 2
>>>> make[2]: Saindo do diretório `/home/virscosta/coinor/**
>>>>
>>>> Couenne/build/Clp/src'
>>>> make[1]: ** [all-recursive] Erro 1
>>>> make[1]: Saindo do diretório `/home/virscosta/coinor/****
>>>> Couenne/build/Clp'
>>>>
>>>> make: ** [all-recursive] Erro 1
>>>>
>>>>
>>>> Could somebody help me please?
>>>>
>>>> Thanks for advance.
>>>>
>>>> Virginia Costa
>>>>
>>>>
>>>>
>>>> ______________________________****_________________
>>>> Couenne mailing list
>>>> Couenne at list.coin-or.org
>>>> http://list.coin-or.org/****mailman/listinfo/couenne<http://list.coin-or.org/**mailman/listinfo/couenne>
>>>> <http:**//list.coin-or.org/mailman/**listinfo/couenne<http://list.coin-or.org/mailman/listinfo/couenne>
>>>> >
>>>>
>>>>
>>>>
>>>
>>
>>
>


-- 
Programa de Engenharia de Sistemas e Computação
PESC/COPPE/UFRJ
Visite nossa página web (http://www.cos.ufrj.br)
Skype: virscosta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.coin-or.org/pipermail/couenne/attachments/20130813/10a6aa5c/attachment.html>