[Clp] configure errors, cannot find BLAS, /bin/sh ./configure failed for Ipopt

Thu Sep 27 12:56:11 EDT 2018

Hi,

you might try adding an include for <cstdio> in CoinFactorization.hpp 
itself.

Stfan

On 9/27/18 6:43 PM, LMH wrote:
> LMH wrote:
>> LMH wrote:
>>> John Forrest wrote:
>>>> I don't know enough about building on windows to give a definite answer but you could
>>>> try one or two things to get something working and then improve the situation.
>>>>
>>>> a) do configure with --without-blas --without-lapack
>>>>
>>>> or
>>>>
>>>> b) go into ThirdParty/Blas and Lapack and do get.Blas and get.Lapack
>>>>
>>>> John Forrest
>>>> On 25/09/18 17:42, LMH wrote:
>>>>> Hello
>>>>>
>>>>> This is the second time I have sent this message. I think there was a subscription
>>>>> issue with the first message. I apologize if this is a duplicate but I have not yet
>>>>> received the original so I have sent it again.
>>>>>
>>>>>
>>>>> I am trying to build clp under cygwin on a windows xp box. I have downloaded the most
>>>>> recent src using subversion and installed it to,
>>>>>
>>>>> C:\cygwin\lib\COIN-OS\
>>>>>
>>>>> It seemed like lib\ is where this should go, let me know if it should go in bin\ or
>>>>> somewhere in local\ instead.
>>>>>
>>>>> The configure script seems to run well but at the end I get,,
>>>>>
>>>>> checking whether -lblas has BLAS... no
>>>>> configure: error: cannot find BLAS
>>>>> configure: error: /bin/sh './configure' failed for Ipopt
>>>>>
>>>>> I have gfortran,
>>>>>
>>>>> $ which gfortran
>>>>> /usr/bin/gfortran
>>>>>
>>>>> $ gfortran -v
>>>>> Target: i686-pc-cygwin
>>>>> Thread model: posix
>>>>> gcc version 5.3.0 (GCC)
>>>>>
>>>>> As far as I can tell, my PATH is configured correctly.
>>>>>
>>>>> C:\cygwin\bin;C:\Program Files\Intel\iCLS
>>>>> Client\;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;C:\Program
>>>>> Files\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files\Intel\Intel(R)
>>>>> Management Engine Components\IPT;c:\dms;c:\dms\gnuplot;C:\Program
>>>>> Files\TortoiseSVN\bin
>>>>>
>>>>> I believe that I have BLAS installed in cygwin but the config script cannot seem to
>>>>> find it. I can post the entire configure script output, or any other output if that
>>>>> would help, just let me know.
>>>>>
>>>>> LMH
>>>>>
>>>>> _______________________________________________
>>>>> Clp mailing list
>>>>> Clp at list.coin-or.org
>>>>> https://urldefense.proofpoint.com/v2/url?u=https-3A__list.coin-2Dor.org_mailman_listinfo_clp&d=DwICAg&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=js2M0T-3OIMIVDvokcKjokJbk0F8QOCd0mT4FsVFE88&m=d0WfxyR11cyfOXA-T7rNQ2OGp4qkrePGbUjFuEMZZLY&s=xmebJ9kLTiaifIEAMtBgTDnwAcnFhj7f3H0DnzaHHrM&e=
>>>>>
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Clp mailing list
>>>> Clp at list.coin-or.org
>>>> https://urldefense.proofpoint.com/v2/url?u=https-3A__list.coin-2Dor.org_mailman_listinfo_clp&d=DwICAg&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=G-rWCwMCBm3eUuw9HwVHnyOeSnSun6y799F3zRs5-x4&m=15JBJE5qc5hAwj760hY9tzyTy9aRHlJEFVt9QcVSfNQ&s=jUDp_AboHjY0zT3f-ewerzcDs11isWMJKN7kHQIbklI&e=
>>>>
>>>>
>>>
>>> Thanks for the advice. I added the third party code as you suggested. The get scripts
>>> did not work because I had issues with wget and also some of the file names in the
>>> scripts do not match the files that were downloaded. I had to manually implement some
>>> of the steps in the get scripts.
>>>
>>> After running configure -C, I get a different error.
>>>
>>> checking whether LAPACK is already available with BLAS library... no
>>> checking whether -llapack has LAPACK... yes
>>> configure: Checking for Harwell subroutine library
>>> checking whether MUMPS is available... no
>>> configure: error: "No linear solver (such as MUMPS) available.  You need to provide
>>> at least one."
>>> configure: error: /bin/sh './configure' failed for Ipopt
>>>
>>> There is nothing listed under MUMPS in the cygwin package manager. How do I go about
>>> resolving this?
>>>
>>> LMH
>>>
>>> _______________________________________________
>>> Clp mailing list
>>> Clp at list.coin-or.org
>>> https://urldefense.proofpoint.com/v2/url?u=https-3A__list.coin-2Dor.org_mailman_listinfo_clp&d=DwICAg&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=G-rWCwMCBm3eUuw9HwVHnyOeSnSun6y799F3zRs5-x4&m=N9fx_-dJ1omk9FGd1XVnM9jPBcJJbAO6zCf6Z2EEhBM&s=DPYXM-vxdVmLtp0X7xR6BMayOQT0RyRMiLJCz_5E968&e=
>>>
>>
>> I downloaded and built MUMPS Version 1.71 according to the cygwin instructions here,
>>
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__sourceforge.net_projects_mumps_files_&d=DwICAg&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=G-rWCwMCBm3eUuw9HwVHnyOeSnSun6y799F3zRs5-x4&m=EN_1NCjY2BBHQEFERdu1TbKKkY-EoG6ZRbTa4qkkqe8&s=tUugfkR19NDQFz7VhEXwjiOwjRHbfR6PhS8vEKGWmoY&e=
>>
>> The build seemed to go fine once I made the suggested local configuration changes.
>> When I re-ran ./config for coin-or, I still get the error,
>>
>> checking whether MUMPS is available... no
>> configure: error: "No linear solver (such as MUMPS) available.  You need to provide
>> at least one."
>> configure: error: /bin/sh './configure' failed for Ipopt
>>
>> I installed mumps to /lib and I suspect that it is being looked for in one of the bin
>> directories. the "which mumps" command doesn't return anything.
>>
>> Should I move the mumps install directory to some other location like /bin or
>> /usr/local/bin, etc?
>>
>> Should I add a ln somewhere that points to where mumps is now?
>>
>> Do I have a different problem altogether?
>>
>> Thanks,
>>
>> LMH
>>
>> _______________________________________________
>> Clp mailing list
>> Clp at list.coin-or.org
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__list.coin-2Dor.org_mailman_listinfo_clp&d=DwICAg&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=G-rWCwMCBm3eUuw9HwVHnyOeSnSun6y799F3zRs5-x4&m=EN_1NCjY2BBHQEFERdu1TbKKkY-EoG6ZRbTa4qkkqe8&s=sh68nXGk7tiQUbywND54IK-RDjWW5JOtJxM9aQ1Y1Hs&e=
>>
> 
> 
> The configure script has completed, but make fails with the following error,
> 
> CoinFactorization.hpp: In member function 'bool CoinFactorization::pivot(int, int,
> CoinBigIndex, CoinBigIndex, double*, unsigned int*, int, int, T*, int)':
> CoinFactorization.hpp:648:54: error: there are no arguments to 'printf' that depend
> on a template parameter, so a declaration of 'printf' must be available [-fpermissive]
>       printf("more memory needed in middle of invert\n");
>                                                        ^
> CoinFactorization.hpp:648:54: note: (if you use '-fpermissive', G++ will accept your
> code, but allowing the use of an undeclared name is deprecated)
> Makefile:566: recipe for target 'CoinFactorization1.lo' failed
> make[2]: *** [CoinFactorization1.lo] Error 1
> make[2]: Leaving directory '/usr/lib/COIN-OS/CoinUtils/src'
> Makefile:360: recipe for target 'all-recursive' failed
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory '/usr/lib/COIN-OS/CoinUtils'
> Makefile:297: recipe for target 'all-recursive' failed
> make: *** [all-recursive] Error 1
> 
> This seems like it may be a compiler version issue. I checked, and <stdio.h> is
> included in the file CoinFactorization1.cpp and I think that is where printf is
> defined. I tried including cstdlib as well but that doesn't help.
> 
> Any suggestions on what to do? I am currently using gcc/g++/gfortran 5.3.0 under
> 32-bit cygwin.
> 
> LMH
> 
> _______________________________________________
> Clp mailing list
> Clp at list.coin-or.org
> https://urldefense.proofpoint.com/v2/url?u=https-3A__list.coin-2Dor.org_mailman_listinfo_clp&d=DwICAg&c=Ngd-ta5yRYsqeUsEDgxhcqsYYY1Xs5ogLxWPA_2Wlc4&r=BRcuJnQr5NAzU29t80hk2rsLc4vrlRySBDabuq0O1ZI&m=89UCf4k0W54s_nQmCeAD3McLiyMEsCLWeAp_42I0uUk&s=5tQ3MQaqtnOp5UcIsuYpn5VEVn9sxt-CPk6k15pvtFA&e=
> 