[Couenne] Configure, build and install Couenne

Pietro Belotti petr.7b6 at gmail.com
Fri Aug 23 03:08:23 EDT 2013 

Hi Virginia,

unfortunately Couenne does not have multi-thread capabilities. This should
not be too difficult to implement since Cbc, the branch-and-bound Couenne
is based upon, has a parallel option. However, a simple try with
--enable-cbc-parallel in Couenne's configure and then adding

bb.model().setNumberThreads (4);

to BonCouenne.cpp results in a code that compiles but does not work. I
suppose some more steps are required to make Couenne thread-safe.

Regards,
Pietro



On Thu, Aug 22, 2013 at 2:05 AM, Virginia Costa <virscosta at gmail.com> wrote:

> Hi, Pietro.
> Today, we installed the couenne package in two Xeon machines (one of them
> has 12 cores). We did the download of the version 0.4 (instead of
> installing version 0.4.4) and SoPlex 1.5.0, and it worked very well. Now,
> we're already using couenne/bonmin with AMPL in our problem. My colleagues
> and I are all grateful for your help (and also Stefan).
>
> We'd like to ask you just one more question: Is it possible to use couenne
> in a parallel mode?
>
> Thank you one more time.
> (or "Mais uma vez obrigada", as we usually say in our language).
>
> Virginia S. Costa
> Programa de Engenharia de Sistemas e Computação
> (Systems Engineering and Computer Science)
> PESC/COPPE/UFRJ -- Brazil
> Web page: http://www.coppe.ufrj.br/english/
>
>
> 2013/8/21 Pietro Belotti <petr.7b6 at gmail.com>
>
>> Hi Virginia,
>>
>> a quick fix: you might as well specify the option --without-soplex to
>> avoid that. SoPlex is used in the feasibility pump, which is disabled by
>> specifying --without-scip. I'm not sure why it does not work on this other
>> machine, but telling configure not to bother buinding SoPlex should be
>> enough.
>>
>> Pietro
>>
>>
>> On Wed, Aug 21, 2013 at 4:32 AM, Virginia Costa <virscosta at gmail.com>wrote:
>>
>>> Hi Pietro,
>>> As I told you before, I install couenne in my machine and it's work
>>> well. However, when I try to do the same procedure in another machine (a
>>> Xeon Quad), I have the following problem:
>>>
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to `soplex::DVector_exact::~DVector_exact()'
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to `soplex::Vector_exact::operator*=(double)'
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to `soplex::DVector_exact::DVector_exact(int)'
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to `soplex::Vector_exact::operator=(soplex::Vector
>>> const&)'
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to `soplex::DVector_exact::reDim(int)'
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to `soplex::Vector_exact::multAdd(double,
>>> soplex::SVector const&)'
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to
>>> `soplex::Vector_exact::operator=(soplex::Vector_exact const&)'
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to `soplex::get_d(double const&)'
>>> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
>>> undefined reference to
>>> `soplex::Vector_exact::operator+=(soplex::Vector_exact const&)'
>>> collect2: ld returned 1 exit status
>>> make[2]: ** [couenne] Erro 1
>>> make[2]: Saindo do diretório `/usr/local/couenne/build/Couenne/src/main'
>>> make[1]: ** [all-recursive] Erro 1
>>> make[1]: Saindo do diretório `/usr/local/couenne/build/Couenne'
>>> make: ** [all-recursive] Erro 1
>>>
>>>
>>> The version of soplex is 1.7.0 and I configure the couenne package like
>>> this "../configure -C --prefix=/usr/local --without-scip".
>>> Have you ever seen this error before?
>>>
>>> Thank you in advance.
>>> (Grata desde já).
>>> Virginia.
>>>
>>>
>>>
>>> 2013/8/17 Pietro Belotti <petr.7b6 at gmail.com>
>>>
>>>> Thanks Virginia. I think the command that's currently used is wget,
>>>> which is quite standard for downloading even large files. As Stefan said,
>>>> it's probably just a matter of finding alternative URLs.
>>>>
>>>> Pietro
>>>>
>>>>
>>>> On Wed, Aug 14, 2013 at 12:36 PM, Virginia Costa <virscosta at gmail.com>wrote:
>>>>
>>>>> Hi Stefan and Pietro,
>>>>> A temporary way to download the AMPL solvers could be to use the
>>>>> HTTrack program (http://www.httrack.com/ ). We can also find this
>>>>> program in apt repositories for Ubuntu users and we can use its console
>>>>> version by the command httrack, fact that allow us to write a script. With
>>>>> this program, we can download the directory
>>>>> http://www.netlib.org/ampl/solvers/ completely. I used HTTrack in its
>>>>> web browser version, but I think that it's possible to write a script with
>>>>> it.
>>>>> It's just an idea.
>>>>> Now, I have to learn how to use Couenne. :-)
>>>>> Thank you so much.
>>>>> Virginia.
>>>>> --
>>>>> Programa de Engenharia de Sistemas e Computação
>>>>> PESC/COPPE/UFRJ
>>>>> Visite nossa página web: http://www.cos.ufrj.br
>>>>> Visite a página de nossa universidade: http://www.ufrj.br<http://www.ufrj.br/#>
>>>>> Skype: virscosta
>>>>>
>>>>>
>>>>> 2013/8/14 Stefan Vigerske <stefan at math.hu-berlin.de>
>>>>>
>>>>>> Hi,
>>>>>>
>>>>>> the latest stable branches and releases of ThirdParty projects have
>>>>>> some workarounds for the broken FTP access to netlib.
>>>>>> For Blas and Lapack, they use HTTP access.
>>>>>> For ASL, this does not work (there is no solvers.tar via http), but
>>>>>> it now downloads from the Sandia mirror, if netlib-ftp doesn't work.
>>>>>> Unfortunately, also sandia.gov was offline from time to time
>>>>>> recently.
>>>>>>
>>>>>> Anyhow, we are working on a solution that makes us more independent
>>>>>> of netlib (and more dependent on the coin-or server, instead).
>>>>>>
>>>>>> Stefan
>>>>>>
>>>>>>
>>>>>> On 08/14/2013 11:27 AM, Pietro Belotti wrote:
>>>>>>
>>>>>>> I had some problem with the netlib FTP server before. Stefan, is
>>>>>>> there any
>>>>>>> other URL we can wget those files from?
>>>>>>>
>>>>>>> Pietro
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Aug 14, 2013 at 1:37 AM, Virginia Costa <virscosta at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>  Hello Pietro and Stefan,
>>>>>>>>
>>>>>>>> Thanks so much for your help!
>>>>>>>> It's working now! The binary file of Couenne was generated.
>>>>>>>> But the get.* script of ASL directory is not ok. We can't download
>>>>>>>> the
>>>>>>>> solvers.tar from Netlib ftp site. I had to download each file of
>>>>>>>> ampl from
>>>>>>>> http site.
>>>>>>>> Great!!! :-)
>>>>>>>> Thanks one more time.
>>>>>>>> Virginia.
>>>>>>>>
>>>>>>>>
>>>>>>>> 2013/8/13 Pietro Belotti <petr.7b6 at gmail.com>
>>>>>>>>
>>>>>>>>  Hi Virginia,
>>>>>>>>>
>>>>>>>>> the libraries can be built without ASL, but the Couenne executable
>>>>>>>>> needs
>>>>>>>>> the ASL, which you can download in the ThirdParty directories. You
>>>>>>>>> should
>>>>>>>>> most of the ThirdParty software (ASL, Blas, Lapack, Metis, Mumps
>>>>>>>>> are
>>>>>>>>> required) with the get.* scripts in each of the subdirectories of
>>>>>>>>> ThirdParty, and then remove the option "--without-asl" from the
>>>>>>>>> configure
>>>>>>>>> command.
>>>>>>>>>
>>>>>>>>> Pietro
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Aug 13, 2013 at 11:43 PM, Virginia Costa <
>>>>>>>>> virscosta at gmail.com>wrote:
>>>>>>>>>
>>>>>>>>>  Hi Pietro,
>>>>>>>>>>
>>>>>>>>>> Yes, I saw this explanation in the Couenne documentation. But, I
>>>>>>>>>> don't
>>>>>>>>>> know what happens that there are just these files in
>>>>>>>>>> Couenne/src/main/
>>>>>>>>>> directory:
>>>>>>>>>> BonCouenneSetup.lo  CouenneBab.lo  libBonCouenne.la  Makefile
>>>>>>>>>>   SmartAslDestr.lo
>>>>>>>>>>
>>>>>>>>>> I did the following:
>>>>>>>>>>
>>>>>>>>>> 1) download the couenne package (v. 0.4.4).
>>>>>>>>>> 2) extract the files in home.
>>>>>>>>>> 3) cd Couenne,  mkdir build and cd build;
>>>>>>>>>> 4) ../configure -C --without-asl --without-scip
>>>>>>>>>> 5) make
>>>>>>>>>> 6) make install.
>>>>>>>>>>
>>>>>>>>>> It creates the following directories inside build:
>>>>>>>>>>
>>>>>>>>>> drwxrwxr-x 16 virscosta virscosta   4096 Ago 13 16:01 .
>>>>>>>>>> drwxr-xr-x 14 virscosta virscosta   4096 Ago 13 15:42 ..
>>>>>>>>>> drwxrwxr-x  2 virscosta virscosta   4096 Ago 13 16:01 bin
>>>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Bonmin
>>>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Cbc
>>>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Cgl
>>>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Clp
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta     62 Ago 13 15:36
>>>>>>>>>> coin_subdirs.txt
>>>>>>>>>> drwxrwxr-x  5 virscosta virscosta   4096 Ago 13 15:37 CoinUtils
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta   9047 Ago 13 15:37 config.cache
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta  45899 Ago 13 15:37 config.log
>>>>>>>>>> -rwxrwxr-x  1 virscosta virscosta  32232 Ago 13 15:36
>>>>>>>>>> config.status
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta   4096 Ago 13 15:37 Couenne
>>>>>>>>>> drwxrwxr-x  2 virscosta virscosta   4096 Ago 13 15:36 doxydoc
>>>>>>>>>> drwxrwxr-x  3 virscosta virscosta   4096 Ago 13 16:01 include
>>>>>>>>>> drwxrwxr-x  7 virscosta virscosta   4096 Ago 13 15:37 Ipopt
>>>>>>>>>> drwxrwxr-x  3 virscosta virscosta   4096 Ago 13 16:01 lib
>>>>>>>>>> -rwxrwxr-x  1 virscosta virscosta 228735 Ago 13 15:36 libtool
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta  24770 Ago 13 15:36 Makefile
>>>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Osi
>>>>>>>>>> drwxrwxr-x  3 virscosta virscosta   4096 Ago 13 16:01 share
>>>>>>>>>> drwxrwxr-x  3 virscosta virscosta   4096 Ago 13 15:36 ThirdParty
>>>>>>>>>>
>>>>>>>>>> Inside Couenne, I have:
>>>>>>>>>>
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:37 .
>>>>>>>>>> drwxrwxr-x 16 virscosta virscosta  4096 Ago 13 16:01 ..
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta 42626 Ago 13 15:37 config.log
>>>>>>>>>> -rwxrwxr-x  1 virscosta virscosta 53831 Ago 13 15:37 config.status
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta   352 Ago 13 15:37 couenne.pc
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta   760 Ago 13 15:37
>>>>>>>>>> couenne-uninstalled.pc
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta 37695 Ago 13 15:37 Makefile
>>>>>>>>>> drwxrwxr-x 16 virscosta virscosta  4096 Ago 13 16:00 src
>>>>>>>>>> drwxrwxr-x  2 virscosta virscosta  4096 Ago 13 15:37 test
>>>>>>>>>>
>>>>>>>>>> Inside src:
>>>>>>>>>>
>>>>>>>>>> drwxrwxr-x 16 virscosta virscosta  4096 Ago 13 16:00 .
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:37 ..
>>>>>>>>>> drwxrwxr-x  5 virscosta virscosta  4096 Ago 13 15:59
>>>>>>>>>> bound_tightening
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:00 branch
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta   544 Ago 13 15:37
>>>>>>>>>> config_couenne.h
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta  3549 Ago 13 15:37 config.h
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:59 convex
>>>>>>>>>> drwxrwxr-x  3 virscosta virscosta  4096 Ago 13 15:37 cut
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:00 disjunctive
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:58 expression
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:00 heuristics
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:00 interfaces
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta   837 Ago 13 16:00 libCouenne.la
>>>>>>>>>> drwxrwxr-x  2 virscosta virscosta  4096 Ago 13 16:00 .libs
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:01 main
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta 35886 Ago 13 15:37 Makefile
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:58 problem
>>>>>>>>>> drwxrwxr-x  3 virscosta virscosta  4096 Ago 13 15:37 readnl
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta    27 Ago 13 15:37 stamp-h1
>>>>>>>>>> -rw-rw-r--  1 virscosta virscosta    35 Ago 13 15:37 stamp-h2
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:58 standardize
>>>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:56 util
>>>>>>>>>>
>>>>>>>>>> Inside main, just this: BonCouenneSetup.lo  CouenneBab.lo
>>>>>>>>>>   libBonCouenne.la  Makefile  SmartAslDestr.lo
>>>>>>>>>>
>>>>>>>>>> Do you have any idea what happened?
>>>>>>>>>> Many Thanks.
>>>>>>>>>> Virginia.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2013/8/13 Pietro Belotti <petr.7b6 at gmail.com>
>>>>>>>>>>
>>>>>>>>>>  Virginia,
>>>>>>>>>>>
>>>>>>>>>>> it depends on what you set with the --prefix option in
>>>>>>>>>>> configure, if
>>>>>>>>>>> you used it. If you want to have the executable in $HOME/bin,
>>>>>>>>>>> then you
>>>>>>>>>>> should give the option
>>>>>>>>>>>
>>>>>>>>>>> --prefix=$HOME
>>>>>>>>>>>
>>>>>>>>>>> Otherwise, the executable should be in Couenne/src/main/couenne,
>>>>>>>>>>> from
>>>>>>>>>>> the directory where you launched the make command.
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>> Pietro
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, Aug 13, 2013 at 7:05 PM, Virginia Costa <
>>>>>>>>>>> virscosta at gmail.com>wrote:
>>>>>>>>>>>
>>>>>>>>>>>  Hi again,
>>>>>>>>>>>>
>>>>>>>>>>>> Now, I try to install Couenne with --without-scip confguration
>>>>>>>>>>>> option.
>>>>>>>>>>>> There was no more erros. So, I executed "make install". But,
>>>>>>>>>>>> when I look
>>>>>>>>>>>> inside the bin directory, there's no couenne binary file.
>>>>>>>>>>>> Do you know what I did wrong?
>>>>>>>>>>>> Many Thanks.
>>>>>>>>>>>> Virginia.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2013/8/13 Stefan Vigerske <stefan at math.hu-berlin.de>
>>>>>>>>>>>>
>>>>>>>>>>>>  Hi,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 08/13/2013 07:42 PM, Virginia Costa wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>  Hi Stefan,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks for your answer. I have another question: what about
>>>>>>>>>>>>>> SCIP?
>>>>>>>>>>>>>> Does
>>>>>>>>>>>>>> couenne need it to run?
>>>>>>>>>>>>>> After your answer, I try to build again the package with
>>>>>>>>>>>>>> --without-glpk
>>>>>>>>>>>>>> configure option. There's no more error with amd.h, but, now,
>>>>>>>>>>>>>> scip is
>>>>>>>>>>>>>> returning some errors.
>>>>>>>>>>>>>> Do you know if scip is necessary to install Couenne?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>> No, SCIP may only used in the feaspump heuristic, which is off
>>>>>>>>>>>>> by
>>>>>>>>>>>>> default.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Stefan
>>>>>>>>>>>>>
>>>>>>>>>>>>>   Thanks one more time.
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Virginia.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 2013/8/13 Stefan Vigerske <stefan at math.hu-berlin.de>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>   Hi,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> your Glpk installation does not seem to bring the amd.h that
>>>>>>>>>>>>>>> usually comes
>>>>>>>>>>>>>>> with Glpk. Clp assumes that if it has Glpk, then also amd.h
>>>>>>>>>>>>>>> will be
>>>>>>>>>>>>>>> available.
>>>>>>>>>>>>>>> However, Couenne does not make any use of Glpk, there is no
>>>>>>>>>>>>>>> need to
>>>>>>>>>>>>>>> include it.
>>>>>>>>>>>>>>> Further, if you have blas and lapack installed in your
>>>>>>>>>>>>>>> system, then
>>>>>>>>>>>>>>> it
>>>>>>>>>>>>>>> should be picked up by configure automatically.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Stefan
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On 08/13/2013 04:04 AM, Virginia Costa wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>   Hello everybody,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I'm a new user of Couenne and I'd like to install this
>>>>>>>>>>>>>>>> package in
>>>>>>>>>>>>>>>> my
>>>>>>>>>>>>>>>> machine, which has Ubuntu 13.04. I tried to install it so
>>>>>>>>>>>>>>>> many
>>>>>>>>>>>>>>>> times, but,
>>>>>>>>>>>>>>>>     unfortunately, I didn't get it.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I downloaded the Couenne package by svn, as follows:
>>>>>>>>>>>>>>>> svn co https://projects.coin-or.org/***
>>>>>>>>>>>>>>>> ***svn/Couenne/stable/0.4<https://projects.coin-or.org/****svn/Couenne/stable/0.4>
>>>>>>>>>>>>>>>> <http**s://projects.coin-or.org/****svn/Couenne/stable/0.4<https://projects.coin-or.org/**svn/Couenne/stable/0.4>
>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>> <https:**//projects.coin-or.**org/svn/**Couenne/stable/0.4<http://projects.coin-or.org/svn/**Couenne/stable/0.4>
>>>>>>>>>>>>>>>> <h**ttps://projects.coin-or.org/**svn/Couenne/stable/0.4<https://projects.coin-or.org/svn/Couenne/stable/0.4>
>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>  Couenne
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> In the operation system, I have glpk, zlib, blas and lapack
>>>>>>>>>>>>>>>> installed. I
>>>>>>>>>>>>>>>> also installed soplex 1.7.0 in the ThirdParty  directory
>>>>>>>>>>>>>>>> and I
>>>>>>>>>>>>>>>> installed
>>>>>>>>>>>>>>>> the packages Metis, SCIP and Mumps by using the get.XXXX
>>>>>>>>>>>>>>>> script,
>>>>>>>>>>>>>>>> avaiable
>>>>>>>>>>>>>>>> inside the Couenne package.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> After all, I configure the package as following:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> #!/bin/bash
>>>>>>>>>>>>>>>> GLPKLIB="/usr/lib"
>>>>>>>>>>>>>>>> GLPKINC="/usr/include"
>>>>>>>>>>>>>>>> BLASLIB="/usr/lib/libblas"
>>>>>>>>>>>>>>>> LAPACKLIB="/usr/lib/lapack"
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ../configure -C --with-glpk-lib=${GLPKLIB}
>>>>>>>>>>>>>>>> --with-glpk-incdir=${GLPKINC}
>>>>>>>>>>>>>>>> --with-blas-lib=${BLASLIB} --with-lapack-lib=${LAPACKLIB}
>>>>>>>>>>>>>>>> --without-asl
>>>>>>>>>>>>>>>> --with-gnu-ld
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> And I got the output showed in the file attached.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> When I try to buid the package, It's returns the following
>>>>>>>>>>>>>>>> error:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> (...)
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>     g++ -DHAVE_CONFIG_H -I. -I../../../Clp/src
>>>>>>>>>>>>>>>> -I/home/virscosta/coinor/******
>>>>>>>>>>>>>>>> Couenne/ThirdParty/Mumps/****
>>>>>>>>>>>>>>>> MUMPS/libseq
>>>>>>>>>>>>>>>> -I/home/virscosta/coinor/******
>>>>>>>>>>>>>>>> Couenne/ThirdParty/Mumps/****
>>>>>>>>>>>>>>>> MUMPS/include
>>>>>>>>>>>>>>>> -I/home/virscosta/coinor/******
>>>>>>>>>>>>>>>> Couenne/ThirdParty/Metis/****
>>>>>>>>>>>>>>>> metis-4.0/Lib
>>>>>>>>>>>>>>>> -I/usr/include -I/home/virscosta/coinor/******
>>>>>>>>>>>>>>>> Couenne/CoinUtils/src
>>>>>>>>>>>>>>>> -I/home/virscosta/coinor/******Couenne/build/CoinUtils/src
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -DCOIN_HAS_CLP -O3
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> -pipe -DNDEBUG -pedantic-errors -Wparentheses -Wreturn-type
>>>>>>>>>>>>>>>> -Wcast-qual
>>>>>>>>>>>>>>>> -Wall -Wpointer-arith -Wwrite-strings -Wconversion
>>>>>>>>>>>>>>>> -Wno-unknown-pragmas
>>>>>>>>>>>>>>>> -Wno-long-long -DCLP_BUILD -MT ClpCholeskyUfl.lo -MD -MP -MF
>>>>>>>>>>>>>>>> .deps/ClpCholeskyUfl.Tpo -c ../../../Clp/src/******
>>>>>>>>>>>>>>>> ClpCholeskyUfl.cpp
>>>>>>>>>>>>>>>>   -fPIC
>>>>>>>>>>>>>>>> -DPIC -o .libs/ClpCholeskyUfl.o
>>>>>>>>>>>>>>>> ../../../Clp/src/******ClpCholeskyUfl.cpp:13:17: fatal
>>>>>>>>>>>>>>>> error:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> amd.h: No such
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> file
>>>>>>>>>>>>>>>> or directory
>>>>>>>>>>>>>>>> compilation terminated.
>>>>>>>>>>>>>>>> make[4]: ** [ClpCholeskyUfl.lo] Erro 1
>>>>>>>>>>>>>>>> make[4]: Saindo do diretório `/home/virscosta/coinor/**
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Couenne/build/Clp/src'
>>>>>>>>>>>>>>>> make[3]: ** [all-recursive] Erro 1
>>>>>>>>>>>>>>>> make[3]: Saindo do diretório `/home/virscosta/coinor/**
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Couenne/build/Clp/src'
>>>>>>>>>>>>>>>> make[2]: ** [all] Erro 2
>>>>>>>>>>>>>>>> make[2]: Saindo do diretório `/home/virscosta/coinor/**
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Couenne/build/Clp/src'
>>>>>>>>>>>>>>>> make[1]: ** [all-recursive] Erro 1
>>>>>>>>>>>>>>>> make[1]: Saindo do diretório `/home/virscosta/coinor/****
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Couenne/build/Clp'
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> make: ** [all-recursive] Erro 1
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Could somebody help me please?
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Thanks for advance.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Virginia Costa
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> ______________________________******_________________
>>>>>>>>>>>>>>>> Couenne mailing list
>>>>>>>>>>>>>>>> Couenne at list.coin-or.org
>>>>>>>>>>>>>>>> http://list.coin-or.org/******mailman/listinfo/couenne<http://list.coin-or.org/****mailman/listinfo/couenne>
>>>>>>>>>>>>>>>> <http:**//list.coin-or.org/**mailman/**listinfo/couenne<http://list.coin-or.org/**mailman/listinfo/couenne>
>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>> <http:**//list.coin-or.org/**mailman/**listinfo/couenne<http://list.coin-or.org/mailman/**listinfo/couenne>
>>>>>>>>>>>>>>>> <htt**p://list.coin-or.org/mailman/**listinfo/couenne<http://list.coin-or.org/mailman/listinfo/couenne>
>>>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> --
>>>>>>>>>>>> Programa de Engenharia de Sistemas e Computação
>>>>>>>>>>>> PESC/COPPE/UFRJ
>>>>>>>>>>>> Visite nossa página web (http://www.cos.ufrj.br)
>>>>>>>>>>>> Skype: virscosta
>>>>>>>>>>>>
>>>>>>>>>>>> ______________________________**_________________
>>>>>>>>>>>> Couenne mailing list
>>>>>>>>>>>> Couenne at list.coin-or.org
>>>>>>>>>>>> http://list.coin-or.org/**mailman/listinfo/couenne<http://list.coin-or.org/mailman/listinfo/couenne>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Programa de Engenharia de Sistemas e Computação
>>>>>>>>>> PESC/COPPE/UFRJ
>>>>>>>>>> Visite nossa página web (http://www.cos.ufrj.br)
>>>>>>>>>> Skype: virscosta
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Programa de Engenharia de Sistemas e Computação
>>>>>>>> PESC/COPPE/UFRJ
>>>>>>>> Visite nossa página web (http://www.cos.ufrj.br)
>>>>>>>> Skype: virscosta
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>> --
>>> Programa de Engenharia de Sistemas e Computação
>>> PESC/COPPE/UFRJ
>>> Visite nossa página web (http://www.cos.ufrj.br)
>>> Skype: virscosta
>>>
>>
>>
>
>
> --
> Programa de Engenharia de Sistemas e Computação
> PESC/COPPE/UFRJ
> Visite nossa página web (http://www.cos.ufrj.br)
> Skype: virscosta
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.coin-or.org/pipermail/couenne/attachments/20130823/7325cdf6/attachment.html>

More information about the Couenne mailing list