[Couenne] Configure, build and install Couenne

Pietro Belotti petr.7b6 at gmail.com
Wed Aug 21 18:21:04 EDT 2013 

Hi Virginia,

a quick fix: you might as well specify the option --without-soplex to avoid
that. SoPlex is used in the feasibility pump, which is disabled by
specifying --without-scip. I'm not sure why it does not work on this other
machine, but telling configure not to bother buinding SoPlex should be
enough.

Pietro


On Wed, Aug 21, 2013 at 4:32 AM, Virginia Costa <virscosta at gmail.com> wrote:

> Hi Pietro,
> As I told you before, I install couenne in my machine and it's work well.
> However, when I try to do the same procedure in another machine (a Xeon
> Quad), I have the following problem:
>
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to `soplex::DVector_exact::~DVector_exact()'
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to `soplex::Vector_exact::operator*=(double)'
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to `soplex::DVector_exact::DVector_exact(int)'
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to `soplex::Vector_exact::operator=(soplex::Vector
> const&)'
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to `soplex::DVector_exact::reDim(int)'
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to `soplex::Vector_exact::multAdd(double,
> soplex::SVector const&)'
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to
> `soplex::Vector_exact::operator=(soplex::Vector_exact const&)'
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to `soplex::get_d(double const&)'
> /usr/local/couenne/build/ThirdParty/SoPlex/.libs/libcoinsoplex.so:
> undefined reference to
> `soplex::Vector_exact::operator+=(soplex::Vector_exact const&)'
> collect2: ld returned 1 exit status
> make[2]: ** [couenne] Erro 1
> make[2]: Saindo do diretório `/usr/local/couenne/build/Couenne/src/main'
> make[1]: ** [all-recursive] Erro 1
> make[1]: Saindo do diretório `/usr/local/couenne/build/Couenne'
> make: ** [all-recursive] Erro 1
>
>
> The version of soplex is 1.7.0 and I configure the couenne package like
> this "../configure -C --prefix=/usr/local --without-scip".
> Have you ever seen this error before?
>
> Thank you in advance.
> (Grata desde já).
> Virginia.
>
>
>
> 2013/8/17 Pietro Belotti <petr.7b6 at gmail.com>
>
>> Thanks Virginia. I think the command that's currently used is wget, which
>> is quite standard for downloading even large files. As Stefan said, it's
>> probably just a matter of finding alternative URLs.
>>
>> Pietro
>>
>>
>> On Wed, Aug 14, 2013 at 12:36 PM, Virginia Costa <virscosta at gmail.com>wrote:
>>
>>> Hi Stefan and Pietro,
>>> A temporary way to download the AMPL solvers could be to use the HTTrack
>>> program (http://www.httrack.com/ ). We can also find this program in
>>> apt repositories for Ubuntu users and we can use its console version by the
>>> command httrack, fact that allow us to write a script. With this program,
>>> we can download the directory http://www.netlib.org/ampl/solvers/completely. I used HTTrack in its web browser version, but I think that
>>> it's possible to write a script with it.
>>> It's just an idea.
>>> Now, I have to learn how to use Couenne. :-)
>>> Thank you so much.
>>> Virginia.
>>> --
>>> Programa de Engenharia de Sistemas e Computação
>>> PESC/COPPE/UFRJ
>>> Visite nossa página web: http://www.cos.ufrj.br
>>> Visite a página de nossa universidade: http://www.ufrj.br<http://www.ufrj.br/#>
>>> Skype: virscosta
>>>
>>>
>>> 2013/8/14 Stefan Vigerske <stefan at math.hu-berlin.de>
>>>
>>>> Hi,
>>>>
>>>> the latest stable branches and releases of ThirdParty projects have
>>>> some workarounds for the broken FTP access to netlib.
>>>> For Blas and Lapack, they use HTTP access.
>>>> For ASL, this does not work (there is no solvers.tar via http), but it
>>>> now downloads from the Sandia mirror, if netlib-ftp doesn't work.
>>>> Unfortunately, also sandia.gov was offline from time to time recently.
>>>>
>>>> Anyhow, we are working on a solution that makes us more independent of
>>>> netlib (and more dependent on the coin-or server, instead).
>>>>
>>>> Stefan
>>>>
>>>>
>>>> On 08/14/2013 11:27 AM, Pietro Belotti wrote:
>>>>
>>>>> I had some problem with the netlib FTP server before. Stefan, is there
>>>>> any
>>>>> other URL we can wget those files from?
>>>>>
>>>>> Pietro
>>>>>
>>>>>
>>>>> On Wed, Aug 14, 2013 at 1:37 AM, Virginia Costa <virscosta at gmail.com>
>>>>> wrote:
>>>>>
>>>>>  Hello Pietro and Stefan,
>>>>>>
>>>>>> Thanks so much for your help!
>>>>>> It's working now! The binary file of Couenne was generated.
>>>>>> But the get.* script of ASL directory is not ok. We can't download the
>>>>>> solvers.tar from Netlib ftp site. I had to download each file of ampl
>>>>>> from
>>>>>> http site.
>>>>>> Great!!! :-)
>>>>>> Thanks one more time.
>>>>>> Virginia.
>>>>>>
>>>>>>
>>>>>> 2013/8/13 Pietro Belotti <petr.7b6 at gmail.com>
>>>>>>
>>>>>>  Hi Virginia,
>>>>>>>
>>>>>>> the libraries can be built without ASL, but the Couenne executable
>>>>>>> needs
>>>>>>> the ASL, which you can download in the ThirdParty directories. You
>>>>>>> should
>>>>>>> most of the ThirdParty software (ASL, Blas, Lapack, Metis, Mumps are
>>>>>>> required) with the get.* scripts in each of the subdirectories of
>>>>>>> ThirdParty, and then remove the option "--without-asl" from the
>>>>>>> configure
>>>>>>> command.
>>>>>>>
>>>>>>> Pietro
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Aug 13, 2013 at 11:43 PM, Virginia Costa <
>>>>>>> virscosta at gmail.com>wrote:
>>>>>>>
>>>>>>>  Hi Pietro,
>>>>>>>>
>>>>>>>> Yes, I saw this explanation in the Couenne documentation. But, I
>>>>>>>> don't
>>>>>>>> know what happens that there are just these files in
>>>>>>>> Couenne/src/main/
>>>>>>>> directory:
>>>>>>>> BonCouenneSetup.lo  CouenneBab.lo  libBonCouenne.la  Makefile
>>>>>>>>   SmartAslDestr.lo
>>>>>>>>
>>>>>>>> I did the following:
>>>>>>>>
>>>>>>>> 1) download the couenne package (v. 0.4.4).
>>>>>>>> 2) extract the files in home.
>>>>>>>> 3) cd Couenne,  mkdir build and cd build;
>>>>>>>> 4) ../configure -C --without-asl --without-scip
>>>>>>>> 5) make
>>>>>>>> 6) make install.
>>>>>>>>
>>>>>>>> It creates the following directories inside build:
>>>>>>>>
>>>>>>>> drwxrwxr-x 16 virscosta virscosta   4096 Ago 13 16:01 .
>>>>>>>> drwxr-xr-x 14 virscosta virscosta   4096 Ago 13 15:42 ..
>>>>>>>> drwxrwxr-x  2 virscosta virscosta   4096 Ago 13 16:01 bin
>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Bonmin
>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Cbc
>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Cgl
>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Clp
>>>>>>>> -rw-rw-r--  1 virscosta virscosta     62 Ago 13 15:36
>>>>>>>> coin_subdirs.txt
>>>>>>>> drwxrwxr-x  5 virscosta virscosta   4096 Ago 13 15:37 CoinUtils
>>>>>>>> -rw-rw-r--  1 virscosta virscosta   9047 Ago 13 15:37 config.cache
>>>>>>>> -rw-rw-r--  1 virscosta virscosta  45899 Ago 13 15:37 config.log
>>>>>>>> -rwxrwxr-x  1 virscosta virscosta  32232 Ago 13 15:36 config.status
>>>>>>>> drwxrwxr-x  4 virscosta virscosta   4096 Ago 13 15:37 Couenne
>>>>>>>> drwxrwxr-x  2 virscosta virscosta   4096 Ago 13 15:36 doxydoc
>>>>>>>> drwxrwxr-x  3 virscosta virscosta   4096 Ago 13 16:01 include
>>>>>>>> drwxrwxr-x  7 virscosta virscosta   4096 Ago 13 15:37 Ipopt
>>>>>>>> drwxrwxr-x  3 virscosta virscosta   4096 Ago 13 16:01 lib
>>>>>>>> -rwxrwxr-x  1 virscosta virscosta 228735 Ago 13 15:36 libtool
>>>>>>>> -rw-rw-r--  1 virscosta virscosta  24770 Ago 13 15:36 Makefile
>>>>>>>> drwxrwxr-x  6 virscosta virscosta   4096 Ago 13 15:37 Osi
>>>>>>>> drwxrwxr-x  3 virscosta virscosta   4096 Ago 13 16:01 share
>>>>>>>> drwxrwxr-x  3 virscosta virscosta   4096 Ago 13 15:36 ThirdParty
>>>>>>>>
>>>>>>>> Inside Couenne, I have:
>>>>>>>>
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:37 .
>>>>>>>> drwxrwxr-x 16 virscosta virscosta  4096 Ago 13 16:01 ..
>>>>>>>> -rw-rw-r--  1 virscosta virscosta 42626 Ago 13 15:37 config.log
>>>>>>>> -rwxrwxr-x  1 virscosta virscosta 53831 Ago 13 15:37 config.status
>>>>>>>> -rw-rw-r--  1 virscosta virscosta   352 Ago 13 15:37 couenne.pc
>>>>>>>> -rw-rw-r--  1 virscosta virscosta   760 Ago 13 15:37
>>>>>>>> couenne-uninstalled.pc
>>>>>>>> -rw-rw-r--  1 virscosta virscosta 37695 Ago 13 15:37 Makefile
>>>>>>>> drwxrwxr-x 16 virscosta virscosta  4096 Ago 13 16:00 src
>>>>>>>> drwxrwxr-x  2 virscosta virscosta  4096 Ago 13 15:37 test
>>>>>>>>
>>>>>>>> Inside src:
>>>>>>>>
>>>>>>>> drwxrwxr-x 16 virscosta virscosta  4096 Ago 13 16:00 .
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:37 ..
>>>>>>>> drwxrwxr-x  5 virscosta virscosta  4096 Ago 13 15:59
>>>>>>>> bound_tightening
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:00 branch
>>>>>>>> -rw-rw-r--  1 virscosta virscosta   544 Ago 13 15:37
>>>>>>>> config_couenne.h
>>>>>>>> -rw-rw-r--  1 virscosta virscosta  3549 Ago 13 15:37 config.h
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:59 convex
>>>>>>>> drwxrwxr-x  3 virscosta virscosta  4096 Ago 13 15:37 cut
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:00 disjunctive
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:58 expression
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:00 heuristics
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:00 interfaces
>>>>>>>> -rw-rw-r--  1 virscosta virscosta   837 Ago 13 16:00 libCouenne.la
>>>>>>>> drwxrwxr-x  2 virscosta virscosta  4096 Ago 13 16:00 .libs
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 16:01 main
>>>>>>>> -rw-rw-r--  1 virscosta virscosta 35886 Ago 13 15:37 Makefile
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:58 problem
>>>>>>>> drwxrwxr-x  3 virscosta virscosta  4096 Ago 13 15:37 readnl
>>>>>>>> -rw-rw-r--  1 virscosta virscosta    27 Ago 13 15:37 stamp-h1
>>>>>>>> -rw-rw-r--  1 virscosta virscosta    35 Ago 13 15:37 stamp-h2
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:58 standardize
>>>>>>>> drwxrwxr-x  4 virscosta virscosta  4096 Ago 13 15:56 util
>>>>>>>>
>>>>>>>> Inside main, just this: BonCouenneSetup.lo  CouenneBab.lo
>>>>>>>>   libBonCouenne.la  Makefile  SmartAslDestr.lo
>>>>>>>>
>>>>>>>> Do you have any idea what happened?
>>>>>>>> Many Thanks.
>>>>>>>> Virginia.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> 2013/8/13 Pietro Belotti <petr.7b6 at gmail.com>
>>>>>>>>
>>>>>>>>  Virginia,
>>>>>>>>>
>>>>>>>>> it depends on what you set with the --prefix option in configure,
>>>>>>>>> if
>>>>>>>>> you used it. If you want to have the executable in $HOME/bin, then
>>>>>>>>> you
>>>>>>>>> should give the option
>>>>>>>>>
>>>>>>>>> --prefix=$HOME
>>>>>>>>>
>>>>>>>>> Otherwise, the executable should be in Couenne/src/main/couenne,
>>>>>>>>> from
>>>>>>>>> the directory where you launched the make command.
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Pietro
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, Aug 13, 2013 at 7:05 PM, Virginia Costa <
>>>>>>>>> virscosta at gmail.com>wrote:
>>>>>>>>>
>>>>>>>>>  Hi again,
>>>>>>>>>>
>>>>>>>>>> Now, I try to install Couenne with --without-scip confguration
>>>>>>>>>> option.
>>>>>>>>>> There was no more erros. So, I executed "make install". But, when
>>>>>>>>>> I look
>>>>>>>>>> inside the bin directory, there's no couenne binary file.
>>>>>>>>>> Do you know what I did wrong?
>>>>>>>>>> Many Thanks.
>>>>>>>>>> Virginia.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2013/8/13 Stefan Vigerske <stefan at math.hu-berlin.de>
>>>>>>>>>>
>>>>>>>>>>  Hi,
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On 08/13/2013 07:42 PM, Virginia Costa wrote:
>>>>>>>>>>>
>>>>>>>>>>>  Hi Stefan,
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks for your answer. I have another question: what about
>>>>>>>>>>>> SCIP?
>>>>>>>>>>>> Does
>>>>>>>>>>>> couenne need it to run?
>>>>>>>>>>>> After your answer, I try to build again the package with
>>>>>>>>>>>> --without-glpk
>>>>>>>>>>>> configure option. There's no more error with amd.h, but, now,
>>>>>>>>>>>> scip is
>>>>>>>>>>>> returning some errors.
>>>>>>>>>>>> Do you know if scip is necessary to install Couenne?
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>> No, SCIP may only used in the feaspump heuristic, which is off by
>>>>>>>>>>> default.
>>>>>>>>>>>
>>>>>>>>>>> Stefan
>>>>>>>>>>>
>>>>>>>>>>>   Thanks one more time.
>>>>>>>>>>>
>>>>>>>>>>>> Virginia.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> 2013/8/13 Stefan Vigerske <stefan at math.hu-berlin.de>
>>>>>>>>>>>>
>>>>>>>>>>>>   Hi,
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> your Glpk installation does not seem to bring the amd.h that
>>>>>>>>>>>>> usually comes
>>>>>>>>>>>>> with Glpk. Clp assumes that if it has Glpk, then also amd.h
>>>>>>>>>>>>> will be
>>>>>>>>>>>>> available.
>>>>>>>>>>>>> However, Couenne does not make any use of Glpk, there is no
>>>>>>>>>>>>> need to
>>>>>>>>>>>>> include it.
>>>>>>>>>>>>> Further, if you have blas and lapack installed in your system,
>>>>>>>>>>>>> then
>>>>>>>>>>>>> it
>>>>>>>>>>>>> should be picked up by configure automatically.
>>>>>>>>>>>>>
>>>>>>>>>>>>> Stefan
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On 08/13/2013 04:04 AM, Virginia Costa wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>   Hello everybody,
>>>>>>>>>>>>>
>>>>>>>>>>>>>> I'm a new user of Couenne and I'd like to install this
>>>>>>>>>>>>>> package in
>>>>>>>>>>>>>> my
>>>>>>>>>>>>>> machine, which has Ubuntu 13.04. I tried to install it so many
>>>>>>>>>>>>>> times, but,
>>>>>>>>>>>>>>     unfortunately, I didn't get it.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I downloaded the Couenne package by svn, as follows:
>>>>>>>>>>>>>> svn co https://projects.coin-or.org/***
>>>>>>>>>>>>>> ***svn/Couenne/stable/0.4<https://projects.coin-or.org/****svn/Couenne/stable/0.4>
>>>>>>>>>>>>>> <http**s://projects.coin-or.org/****svn/Couenne/stable/0.4<https://projects.coin-or.org/**svn/Couenne/stable/0.4>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> <https:**//projects.coin-or.**org/svn/**Couenne/stable/0.4<http://projects.coin-or.org/svn/**Couenne/stable/0.4>
>>>>>>>>>>>>>> <h**ttps://projects.coin-or.org/**svn/Couenne/stable/0.4<https://projects.coin-or.org/svn/Couenne/stable/0.4>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  Couenne
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> In the operation system, I have glpk, zlib, blas and lapack
>>>>>>>>>>>>>> installed. I
>>>>>>>>>>>>>> also installed soplex 1.7.0 in the ThirdParty  directory and I
>>>>>>>>>>>>>> installed
>>>>>>>>>>>>>> the packages Metis, SCIP and Mumps by using the get.XXXX
>>>>>>>>>>>>>> script,
>>>>>>>>>>>>>> avaiable
>>>>>>>>>>>>>> inside the Couenne package.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> After all, I configure the package as following:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> #!/bin/bash
>>>>>>>>>>>>>> GLPKLIB="/usr/lib"
>>>>>>>>>>>>>> GLPKINC="/usr/include"
>>>>>>>>>>>>>> BLASLIB="/usr/lib/libblas"
>>>>>>>>>>>>>> LAPACKLIB="/usr/lib/lapack"
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ../configure -C --with-glpk-lib=${GLPKLIB}
>>>>>>>>>>>>>> --with-glpk-incdir=${GLPKINC}
>>>>>>>>>>>>>> --with-blas-lib=${BLASLIB} --with-lapack-lib=${LAPACKLIB}
>>>>>>>>>>>>>> --without-asl
>>>>>>>>>>>>>> --with-gnu-ld
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> And I got the output showed in the file attached.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> When I try to buid the package, It's returns the following
>>>>>>>>>>>>>> error:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> (...)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>     g++ -DHAVE_CONFIG_H -I. -I../../../Clp/src
>>>>>>>>>>>>>> -I/home/virscosta/coinor/******Couenne/ThirdParty/Mumps/****
>>>>>>>>>>>>>> MUMPS/libseq
>>>>>>>>>>>>>> -I/home/virscosta/coinor/******Couenne/ThirdParty/Mumps/****
>>>>>>>>>>>>>> MUMPS/include
>>>>>>>>>>>>>> -I/home/virscosta/coinor/******Couenne/ThirdParty/Metis/****
>>>>>>>>>>>>>> metis-4.0/Lib
>>>>>>>>>>>>>> -I/usr/include -I/home/virscosta/coinor/******
>>>>>>>>>>>>>> Couenne/CoinUtils/src
>>>>>>>>>>>>>> -I/home/virscosta/coinor/******Couenne/build/CoinUtils/src
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -DCOIN_HAS_CLP -O3
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> -pipe -DNDEBUG -pedantic-errors -Wparentheses -Wreturn-type
>>>>>>>>>>>>>> -Wcast-qual
>>>>>>>>>>>>>> -Wall -Wpointer-arith -Wwrite-strings -Wconversion
>>>>>>>>>>>>>> -Wno-unknown-pragmas
>>>>>>>>>>>>>> -Wno-long-long -DCLP_BUILD -MT ClpCholeskyUfl.lo -MD -MP -MF
>>>>>>>>>>>>>> .deps/ClpCholeskyUfl.Tpo -c ../../../Clp/src/******
>>>>>>>>>>>>>> ClpCholeskyUfl.cpp
>>>>>>>>>>>>>>   -fPIC
>>>>>>>>>>>>>> -DPIC -o .libs/ClpCholeskyUfl.o
>>>>>>>>>>>>>> ../../../Clp/src/******ClpCholeskyUfl.cpp:13:17: fatal error:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> amd.h: No such
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> file
>>>>>>>>>>>>>> or directory
>>>>>>>>>>>>>> compilation terminated.
>>>>>>>>>>>>>> make[4]: ** [ClpCholeskyUfl.lo] Erro 1
>>>>>>>>>>>>>> make[4]: Saindo do diretório `/home/virscosta/coinor/**
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Couenne/build/Clp/src'
>>>>>>>>>>>>>> make[3]: ** [all-recursive] Erro 1
>>>>>>>>>>>>>> make[3]: Saindo do diretório `/home/virscosta/coinor/**
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Couenne/build/Clp/src'
>>>>>>>>>>>>>> make[2]: ** [all] Erro 2
>>>>>>>>>>>>>> make[2]: Saindo do diretório `/home/virscosta/coinor/**
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Couenne/build/Clp/src'
>>>>>>>>>>>>>> make[1]: ** [all-recursive] Erro 1
>>>>>>>>>>>>>> make[1]: Saindo do diretório `/home/virscosta/coinor/****
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Couenne/build/Clp'
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> make: ** [all-recursive] Erro 1
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Could somebody help me please?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks for advance.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Virginia Costa
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> ______________________________******_________________
>>>>>>>>>>>>>> Couenne mailing list
>>>>>>>>>>>>>> Couenne at list.coin-or.org
>>>>>>>>>>>>>> http://list.coin-or.org/******mailman/listinfo/couenne<http://list.coin-or.org/****mailman/listinfo/couenne>
>>>>>>>>>>>>>> <http:**//list.coin-or.org/**mailman/**listinfo/couenne<http://list.coin-or.org/**mailman/listinfo/couenne>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>> <http:**//list.coin-or.org/**mailman/**listinfo/couenne<http://list.coin-or.org/mailman/**listinfo/couenne>
>>>>>>>>>>>>>> <htt**p://list.coin-or.org/mailman/**listinfo/couenne<http://list.coin-or.org/mailman/listinfo/couenne>
>>>>>>>>>>>>>> >
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Programa de Engenharia de Sistemas e Computação
>>>>>>>>>> PESC/COPPE/UFRJ
>>>>>>>>>> Visite nossa página web (http://www.cos.ufrj.br)
>>>>>>>>>> Skype: virscosta
>>>>>>>>>>
>>>>>>>>>> ______________________________**_________________
>>>>>>>>>> Couenne mailing list
>>>>>>>>>> Couenne at list.coin-or.org
>>>>>>>>>> http://list.coin-or.org/**mailman/listinfo/couenne<http://list.coin-or.org/mailman/listinfo/couenne>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> --
>>>>>>>> Programa de Engenharia de Sistemas e Computação
>>>>>>>> PESC/COPPE/UFRJ
>>>>>>>> Visite nossa página web (http://www.cos.ufrj.br)
>>>>>>>> Skype: virscosta
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>> --
>>>>>> Programa de Engenharia de Sistemas e Computação
>>>>>> PESC/COPPE/UFRJ
>>>>>> Visite nossa página web (http://www.cos.ufrj.br)
>>>>>> Skype: virscosta
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>>
>>>
>>>
>>
>
>
> --
> Programa de Engenharia de Sistemas e Computação
> PESC/COPPE/UFRJ
> Visite nossa página web (http://www.cos.ufrj.br)
> Skype: virscosta
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://list.coin-or.org/pipermail/couenne/attachments/20130821/eeec104f/attachment.html>

More information about the Couenne mailing list