[Dip] issues with Dip-0.82.0

[Shahin Gelareh]

Thanks Ted for your comments.
After replacing cplex for the existing ones in "config_default.h":
//#define __DECOMP_LP_CLP__
//#define __DECOMP_IP_CBC__

#define __DECOMP_LP_CPX__
#define __DECOMP_IP_CPX__

My VS2010 compiler still gives me error and the error seems to be at
#if defined(__DECOMP_IP_CPX__)||(__DECOMP_LP_CPX__) in "DecompAlgo.cpp"

I passed by this error by changing it to:

#if defined(__DECOMP_IP_CPX__)||defined (__DECOMP_LP_CPX__) in
"DecompAlgo.cpp"


Cheers,


On Tue, Aug 23, 2011 at 7:51 PM, Ted Ralphs <ted at lehigh.edu> wrote:

> When not using autoconf (with the MSVC++ IDE, for example), there is a
> file "config_default.h" that gets included instead of the
> configuration header automatically generated by autoconf. It contains
> all of the settings that would normally get set by autoconf, but must
> be edited by hand. It should be enough to change the preprocessors
> symbols there. At least that is the intended design, so please let us
> know if it doesn't work.
>
> Cheers,
>
> Ted
>
> On Sat, Aug 20, 2011 at 3:39 PM, Shahin Gelareh
> <shahin.gelareh at gmail.com> wrote:
> > Thank you indeed, Ted,
> > I must be more precise next time. I was talking about the VS10 project
> files
> > in windows.
> > The linux setup is perfect.
> >
> > Well for me it works by undefining the CBC and CLP in Decomph.h and
> defiling
> > cplex for IP and LP in preprocessors list.
> >
> >
> > regards,
> > Shahin
> >
> >
> >
> >
> >
> > On Sat, Aug 20, 2011 at 9:32 PM, Ted Ralphs <ted at lehigh.edu> wrote:
> >>
> >> On Sat, Aug 20, 2011 at 3:21 PM, Matthew Galati
> >> <matthew.galati at gmail.com> wrote:
> >>
> >> > You should use the configuration options to switch the LP and IP
> solver.
> >> >
> >> > For example...I use a configuration file that contains the following
> to
> >> > switch to CPLEX:
> >> >
> >> >
> >> > #use CPLEX
> >> > with_lp_solver=cplex
> >> > with_ip_solver=cplex
> >> >
> >> > #location of CPLEX
> >> > with_cplex_incdir="/usr/local/cplex/include/ilcplex"
> >> > with_cplex_lib="-L/usr/local/cplex/lib/x86-64_sles10_4.1/static_pic
> >> > -lcplex
> >> > -lpthread"
> >>
> >> Just to clarify, this means to either give these option to configure
> >> on the command line:
> >>
> >> ./configure --with-lp-solver=cplex ...
> >>
> >> or else put the lines above in a file called share/config.site, which
> >> will add them to the configure command line automatically, as
> >> described here:
> >>
> >> http://www.gnu.org/s/hello/manual/automake/config_002esite.html
> >>
> >> If you want to build in several configurations from the same source
> >> code, I suggest using a VPATH build, which means to make a
> >> subdirectory and run configure from there.
> >>
> >> mkdir build-cbc
> >> cd build-cbc
> >> ../configure
> >> make
> >> make install
> >>
> >> You can then build with another solver in another subdirectory without
> >> over-writing the first installation:
> >>
> >> mkdir build-cplex
> >> cd build-cplex
> >> ../configure
> >> make
> >> make install
> >>
> >> Cheers,
> >>
> >> Ted
> >> --
> >> Dr. Ted Ralphs
> >> Associate Professor, Lehigh University
> >> (610) 628-1280
> >> ted 'at' lehigh 'dot' edu
> >> coral.ie.lehigh.edu/~ted <http://coral.ie.lehigh.edu/%7Eted>
> >
> >
>
>
>
> --
> Dr. Ted Ralphs
> Associate Professor, Lehigh University
> (610) 628-1280
> ted 'at' lehigh 'dot' edu
> coral.ie.lehigh.edu/~ted <http://coral.ie.lehigh.edu/%7Eted>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://list.coin-or.org/pipermail/dip/attachments/20110823/db1ca8c9/attachment.html